Connect with us

Raspberry pi powering monitor?

Discussion in 'Microcontrollers, Programming and IoT' started by Fffyyyss, Aug 5, 2017.

Scroll to continue with content
  1. Fffyyyss

    Fffyyyss

    2
    0
    Aug 5, 2017
    REPOST FROM CIRCUIT HELP, (because i found it was probably better suited for here.) Hello, I just recently purchased a monitor from a yardsale and it takes in a 12V - 3.3A input. My question is could i take a hdmi to vga, thenpower it from the rpis 2 12V gpio pins + 1 of the 3.3V pins then connect ground to 1 or 2 ground pins? If this wont work could someone give me a idea? Even taking a seperate powersupply is possible but not prefered, I would like only to use 1 cord. Here is the monitor on Newegg: https://m.newegg.com/products/N82E16824205009
     
  2. kellys_eye

    kellys_eye

    4,275
    1,147
    Jun 25, 2010
    Power the MONITOR using a proper power pack that can supply 12V and at least 3.3A.

    Nothing else will do.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-