Connect with us

Radio Mic

Discussion in 'Electronic Design' started by HardySpicer, Nov 30, 2008.

Scroll to continue with content
  1. HardySpicer

    HardySpicer Guest

    I have a speech recognition application where I need (for demo
    purposes) to use a radio mic and have the computer speak back via the
    speakers. I installed a bluetooth neadset which works brilliantly -
    however the computer always sends the audio output to my headset
    earphones and not the speakers. Despite the fact I set the sound card
    settings so that the audio out is the speakers it appears to make no
    difference. Any ideas?

  2. Jasen Betts

    Jasen Betts Guest

    it's a software problem.
  3. Guest

    If you were using old-school headphones plugged into the sound
    card's headphone jack I'd say unplug them.

    How is your Bluetooth hooked up?

    Mark L. Fergerson
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day