Connect with us

Radar Jammers

Discussion in 'Electronic Basics' started by Harvz, Apr 13, 2005.

Scroll to continue with content
  1. Harvz

    Harvz Guest

    Is it possible to build your own WORKING radar jammer? and does anyway have
    any schematics????
  2. Lord Garth

    Lord Garth Guest

    It is on absorbing the signal or reflecting it away from the
    Make it work for both radio frequencies and infrared light frequencies, make
    inexpensive and aerodynamic and then design it into a vehicle.
  3. Don Bruder

    Don Bruder Guest

    Yeah, it's trivial to do. It's also trivial to detect one being used,
    even without the aid of anything other than a reasonably trained
    speed-radar operator.

    Dunno about you poor downtrodden aussies that ain't even allowed to own
    guns anymore, but here in "the land of the free", it's also *HUGE* fines
    from the FCC for deliberately interfering with legitimate transmissions,
    on top of whatever the city, local, and state laws may have to say about

    Translation: Only a friggin' IDIOT would actually try to use one. You
    wanna speed? No problem. Just be ready to pony up the price of the
    ticket. It'll be at least thousands, if not tens of thousands, of
    dollars cheaper than the cost of being busted using a jammer, and unlike
    the situation if you're caught running a jammer, the chances of seeing
    any jail time are slim. YMMV for Australia, but considering how "Big
    Brother" the government seems to be turning down there, I wouldn't be
    terribly surprised to learn that you could be executed on the spot for
    mere posession of such a device.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day