Connect with us

R-C circuit differentiator

Discussion in 'Electronic Basics' started by Patrick Chung, Aug 6, 2013.

Scroll to continue with content

  1. In your simulation the peak of Vout is always at 100% of the input
    This is not what you will find in real circuits.
    The signal source must have an Ri.

  2. amdx

    amdx Guest

    I didn't see that, I dropped the frequency to 1 khz and the output
    peak was about 1/2 the input.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day