Connect with us

question on Ohms and Watts

Discussion in 'General Electronics Discussion' started by zevooazaz, Jan 15, 2011.

Scroll to continue with content
  1. zevooazaz

    zevooazaz

    1
    0
    Jan 15, 2011
    Hello all,d
    I'm glad i found people that can help me out with this because I'm not very familiar with this stuff.

    the manual of the power amplifier says that the output is 500w at 8ohms
    So if I put 2 speakers of 250w RMS rate 8ohms it sould be OK.

    Now the manual says something else, as well.
    amplifier output 750w at 4ohms.

    That means, if I connect 4 speakers rated at 8ohms the resistance on the amplifier will be 4ohms.
    so I'm thinking the following
    2 x 250w (8ohm) and 2 x 100w (8ohms)

    will this work? does it absorb the 750watts or it will cause problems to the speakers.
    please help me on this....

    Jim
     
    Last edited: Jan 15, 2011
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-