Connect with us

Question for Altium Designer Users....

Discussion in 'Electronic Design' started by yy7d6, Oct 11, 2006.

Scroll to continue with content
  1. yy7d6

    yy7d6 Guest

    I'm currently having problem with the PCB trace length matching...
    I already set-up the 'Match Length Rule' and click on Tools>>Equalize
    Net Lengths. but still nothing happens? I've intentionally pre-routed
    the nets to be unequal in length to see if its works...
    Any suggestions?

  2. Altium is having their own forums, I suggest you ask
    the question there. The question may already have
    been answered.

  3. Rene Tschaggelar wrote...
    I'm a PCAD user, thinking about changing to Designer,
    as Altium is urging its PCAD users to do, at no cost.
    I'm speculating, but wouldn't this feature show itself
    only for newly-routed traces, after invoking the rule?
    And, does it require auto routing for those traces?
  4. yy7d6

    yy7d6 Guest

    Ayon kay Winfield Hill:
    If tou mean pre-routing the traces, yes, it does however need
    pre-routed traces and rules to be set-up....

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day