Maker Pro
Maker Pro

Question about tact switch sizes

CyborgHamster

Oct 31, 2013
1
Joined
Oct 31, 2013
Messages
1
Hello,

I am fairly new to electronics and have a question about the size of tact switches. The switch is measured as 6x6x6 mm based on the specs. But if I measure the switch, it is 2 cm on each side. How do I determine what the "real" size of the switch will be before buying anymore of them?

... I just found out that I was misreading the ruler... .25 of an inch is about 6mm

Thanks anyway
 
Last edited:
Top