Maker Pro
Maker Pro

Question about push button switch

Hexus

Feb 27, 2017
2
Joined
Feb 27, 2017
Messages
2
I am having a hard time finding a single pole triple throw sustained push switch.

I basicly need one that is off on on. I have found some for lamps that are off L1 L2 then 1 and 2. This would work except I don't want 1 AND 2. Just off L1 L2 off again.

Does such a switch exist?

If someone could direct me to such a switch I would be stoked as heck.
 

donkey

Feb 26, 2011
1,301
Joined
Feb 26, 2011
Messages
1,301

donkey

Feb 26, 2011
1,301
Joined
Feb 26, 2011
Messages
1,301
oh I forgot Rotary switch.... this might be closer to the cut out that you have in mind
 

Hexus

Feb 27, 2017
2
Joined
Feb 27, 2017
Messages
2
The push pull won't work, same with the toggle style. Im putting it under a foot pedal. I am trying to make it so the foot pedal being clicked once does one thing, 2 times does another thing and then 3rd time it goes back off. Kind of like those fan pull strings but with out the L1 + L2.

A pull string would work if it didn't have the L1 + 2

I could make it so when the peddle is pushed down it pulls the string each time. Hmmm
 

donkey

Feb 26, 2011
1,301
Joined
Feb 26, 2011
Messages
1,301
you could try a micro switch and a micro controller with MOSFETs.
someone will probably have a small circuit that will do the same
 
Top