Connect with us

Question about layout in Eagle ?

Discussion in 'Electronic Basics' started by nws, Jul 29, 2003.

Scroll to continue with content
  1. nws

    nws Guest

    I am trying to align two ic's, one has 18 pins, the other 20.
    For some reason the Eagle program seems to be insisting
    that the pins of one ic are always between the pins of
    the second ic. Is this a "snap" problem, what do I do ?

    Tia.
     
  2. RJW

    RJW Guest

    You might have used a different grid when placing the IC's. The reference
    crosshairs for each IC indicate what
    grid the parts where built with. You can make the grid finer and try to re-
    add the parts. Pick a grid that is common to both parts. Are the parts from
    the library that
    comes with Eagle? If so, what are they?
     
  3. David Harmon

    David Harmon Guest

    1. I suggest posting Eagle questions to sci.electronics.cad

    2. Hover the cursor over each IC and note their approximate
    coordinate locations. Then, take your hand off the mouse and type
    in a command to move one or both of them to nearby, rational,
    positions. E.G.
    "move IC2 (1.5 0.8)"

    3. Now that you have the ICs re-alligned, you can mouse them around
    and the grid setting will help instead of fighting with you.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-