Connect with us

Quasar VCR Problem

Discussion in 'Electronic Repair' started by Don, Feb 18, 2004.

Scroll to continue with content
  1. Don

    Don Guest

    I am trying to revive a Quasar VH5270 VCR. The only way I can get it to
    power up is hold the "Power" button in when I plug the unit in. Once it is
    on, the unit works normally on play, rewind, etc. Do I have a power supply
    problem? Or something else?
     
  2. James Sweet

    James Sweet Guest

    I would look at the standby section of the power supply, there should be a
    voltage that powers the microcontroller all the time so pushing the panel
    button will turn it on.
     
  3. Lance Dyer

    Lance Dyer Guest

    check the 6.3v caps with a esr meter they are probally bad
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-