Connect with us

Quadrature output

Discussion in 'Electronic Basics' started by Spider_mce, Sep 7, 2005.

Scroll to continue with content
  1. Spider_mce

    Spider_mce Guest

    Hi can anybody help me out with the problem below.

    i am supposed to create standard quadrature o/p (2 or 3 oututs, A B and
    RM) from PWM or outputcompare pins of a dsPIC 30F3010 or dsPIC 30f3011
    The preferred frequency could be in the range of 1Mhz or a bit lesser.
    The timing parameters for these outputs will be obtained to 2
    Inputcapture modules in the dsPIC from the outside analogue world. Can
    we create this output at good resolution (around 0.1um resolution) when
    the linear change is around 1m/s? dsPIC is running at 30Mhz Fcy

    Many thanks
    Sandeep
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-