Connect with us

Q: PALASM for Windows

Discussion in 'Electronic Design' started by Zdenko, May 22, 2006.

Scroll to continue with content
  1. Zdenko

    Zdenko Guest

    Hi,
    Is there any assembler for PAL16L8 which runs on Windows, something like
    PALASM for DOS?
    Regards,
    Zdenko
     
  2. Never heard of but my PALASM 4 version 1.5, although a DOS program, runs
    well on WinXP.

    petrus bitbyter
     
  3. Why would anyone want to use a 16L8 - use a 16V8. Atmel have a free version of winCUPL on their
    website
     
  4. John  Larkin

    John Larkin Guest

    I run the dos-based ICT PEEL software for programming cpld's, under
    Windows, and they also have the free PLACE Windows version. But they
    don't do the really old MMI parts, the PAL16L8 types.

    John
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-