Connect with us

pwm control of dc motor with chopper

Discussion in 'Sensors and Actuators' started by franko, Mar 6, 2014.

Scroll to continue with content
  1. franko

    franko

    1
    0
    Mar 6, 2014
    I'm new on this forum and you like a little help with a project

    I would like help with the circuit details of pwm control of dc motor with choppers pls give me the circuit diagram with explanation of working . micontroller used to produce pwm signal was arudino .

    thanks
     
  2. Harald Kapp

    Harald Kapp Moderator Moderator

    9,891
    2,096
    Nov 17, 2011
    Hello and welcome to the forum.

    What exactly do you mena by "choppers"?

    If you have the pwm from the arduino, all you need is a power stage to amplify the signal for driving the motor.
    You need to give us more details like voltage and current consumption of the motor, frequency of the pwm signal.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-