Connect with us

"PWM based DC Servo Motor Control"

Discussion in 'Electronic Design' started by Nick, Jan 12, 2006.

Scroll to continue with content
  1. Nick

    Nick Guest

    Hi,

    I have a application to drive a DC Servo Motor, the details are 50V
    1Amp.,
    Control Signals -
    1) Ei = -10V to +10V. (For speed and direction control such as
    a) -10V for High speed Clock Wise
    Direction
    b) 0 V Motor Stop
    c) +10V for High speed Anti -Clock
    Wise Direction
    2) Enable - High for Enable Motor Rotation.
    Low for Stop Motor Instantly.

    We have a Tachogenerator as well as encoder to generate the feedback
    loop.

    Please suggest a device at present i am using "Allegro 3959" and "3637
    for PWM", but i am finding it quite difficult.

    Thanks and regards...
     
  2. Sonali

    Sonali Guest

    Hi!

    what type of device u want?

    What r ur difficulties?

    regards
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-