Connect with us

pushbutton terminal help

Discussion in 'Electronic Basics' started by audry, Dec 16, 2004.

Scroll to continue with content
  1. audry

    audry Guest

    Hola everyone.
    I am running a junction box used for connecting several assemblies to a
    power supply. The connectors used on the junction box are pushbutton
    termials similar to the ones used for speakers (the red and black
    ones). Ive recently discovered that the wires to the assemblies have a
    tendancy to work free from the terminals during the tests that I am
    running. These wires are a fine guage (18 or 20) I believe.
    I need to either find a way to keep these wires from falling out of the
    terminal or find some different type of terminal that will hold the
    wires better.
    Any help is greatly appreciated

    Thanks
    Audry
     
  2. John Fields

    John Fields Guest

     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-