Connect with us

Pulse circuit to operate Latching relay

Discussion in 'General Electronics Discussion' started by KiwiOm, Sep 11, 2017.

Scroll to continue with content
  1. KiwiOm

    KiwiOm

    3
    0
    Sep 11, 2017
    Gidday Forum,
    Im needing to control a Latching relay that is operated by a pulse.

    Im using it to disconnect power from my solar regulator to my LiFEPO4 battery when it reaches its full voltage, and is controlled by bi-stable relays on the BMS.

    I need a circuit that is powered from the relays on the BMS to send a pulse to operate the Latching relay.
    Im looking for something that will not consume much power and once the pulse is sent doesn't consume anything.
    The BMS relays are [email protected] 2 amp
    Thank you in advance
    Kryz
     
  2. Minder

    Minder

    3,103
    664
    Apr 24, 2015
    A magnetic latching relay, requires a shot to latch, another to unlatch, retains memory on power loss, if needed.
    M.
     
  3. AnalogKid

    AnalogKid

    2,515
    718
    Jun 10, 2015
    The link brings up a security error. Please post the datasheet.

    ak
     
  4. KiwiOm

    KiwiOm

    3
    0
    Sep 11, 2017
    latching relay datasheet
     

    Attached Files:

  5. KiwiOm

    KiwiOm

    3
    0
    Sep 11, 2017

    Attached Files:

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-