Connect with us

Pulse 2 JBL

Discussion in 'Troubleshooting and Repair' started by Willj, Oct 13, 2017.

Scroll to continue with content
  1. Willj


    Oct 13, 2017
    Hi all,
    I have a problem with a Bluetooth speaker the JBL pulse 2. The charge port is broken and needs replacing, I can't find an exact replacement and am wondering if I could bypass the micro usb and just attach a usb on a wire to the - & + behind it that goes to the main board. (That I could plug into a wall charger to charge) On this small board is the aux in put and 4 wires going to the main board marked R L ST D- D+, what are these. The speaker still turns on of this connection to the main board is undone. Is it data for when connected to a pc?
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day