Maker Pro
Maker Pro

PT1000 transmitter wiring

Kaleb

Apr 14, 2017
1
Joined
Apr 14, 2017
Messages
1
Hi. Re the schematic printed on the transmitter. Do the solid lines for terminals 1, 3 and 4 mean they must be connected? And dashed line for 2 is optional i.e for a 3 wire RTD.
 

Attachments

  • 747270.png
    747270.png
    98.3 KB · Views: 66

shrtrnd

Jan 15, 2010
3,876
Joined
Jan 15, 2010
Messages
3,876
Get the data sheet from the manufacturer, or on-line. It should tell you what to do for your application.
Heck, email the manufacturer if you have a specific wiring question about your application.
 
Top