Connect with us

PSU connector replacement

Discussion in 'Troubleshooting and Repair' started by Gary Pearson, Dec 6, 2017.

  1. Gary Pearson

    Gary Pearson

    2
    0
    Dec 6, 2017
    Hi There i have a problem with a mixing desk PSU connector. I am looking to retrofit a new connector to the PSU / Mixer When i have come to solder new connectors the wiring colours are different from the PSU, than on the board connector. Can you explain which colour wires correspond to each other. Thanks you for you time...Gary
     
  2. kellys_eye

    kellys_eye

    4,286
    1,146
    Jun 25, 2010
    After consulting Mrs Zoowickies crystal ball she says connect the doohicky colour one to the thingyumybob one.......

    Seriously.... give us a clue!!!
     
    KilgoreCemetery likes this.
  3. Gary Pearson

    Gary Pearson

    2
    0
    Dec 6, 2017
    Sorry it would help if i included the colours.... thanks for replying. PSU wires are Black White and Brown, the wires from the mixer board are Red Green and black. I am connecting with an XLR plug and socket......Many Thanks
     
  4. kellys_eye

    kellys_eye

    4,286
    1,146
    Jun 25, 2010
    Still none the wiser I'm afraid.

    We need to know what signal (voltage) is one what wire and which wires require them! Schematics of the power unit and the mixing desk would help, as would make/model numbers of both units.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-