Connect with us

PSU 8 pin Din pinout for Videonics MX-Pro video mixer

Discussion in 'Datasheets, Manuals and Component Identification' started by patmyhill, Sep 27, 2018.

Scroll to continue with content
  1. patmyhill

    patmyhill

    2
    0
    Sep 27, 2018
    Can any one help me with the pinout for an 8 pin Din plug outputting from the PSU for a Videonics MX-PRO video mixer, specifically the 5V DC 5amp output. Apart from over $300 for the PSU from Sothern Advantage (who don't respond to email questions) the dedicated PSUs seem to be like gold fillings in hens teeth!

    Any help gratefully appreciated
     
  2. shrtrnd

    shrtrnd

    3,755
    484
    Jan 15, 2010
    Did you try Googleing the make and model of your unit to see if there are any free schematics that you can download for your mixer?
    I suppose an Operator's Manual wouldn't give you this information, but if you can find any information from a Service Manual or electrical schematic, that would help.
     
  3. patmyhill

    patmyhill

    2
    0
    Sep 27, 2018
    Thanks for the advice. Google delivers not much. The only service manual available is only some pages and not a circuit diagram
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-