Maker Pro
Maker Pro

proview model 986m 19" monitor help!!!!

T

t3zza36

Jan 1, 1970
0
monitor is only 3 yrs old ,it just went crazy with the stanby flickin
on-off about 6 times then nothing.now when i connect electric nothin
happens no power no led nothing just can hear a ticking coming fro
inside the back.
can anyone help with this ,bear in mind im a newbie!
seems a shame to sling it
 
J

JR North

Jan 1, 1970
0
Mine had same symptoms. Multiple failures in PS diagnosed. Cost $95 to
repair 1 year ago. Still works fine.
JR
 
J

James Sweet

Jan 1, 1970
0
t3zza36 said:
monitor is only 3 yrs old ,it just went crazy with the stanby flicking
on-off about 6 times then nothing.now when i connect electric nothing
happens no power no led nothing just can hear a ticking coming from
inside the back.
can anyone help with this ,bear in mind im a newbie!
seems a shame to sling it!


If it's ticking then a semiconductor in either the output section of the
power supply or the horizontal scan circuit is shorted, you'll have to
test the likely suspects and track down the short then replace the bad part.
 
C

Cobalt

Jan 1, 1970
0
A TD772 repair kit may solve this problem.

http://search.yahoo.com/search?ei=utf-8&fr=slv1-adbe&p=proview+986+repair+kit



|
| monitor is only 3 yrs old ,it just went crazy with the stanby flicking
| on-off about 6 times then nothing.now when i connect electric nothing
| happens no power no led nothing just can hear a ticking coming from
| inside the back.
| can anyone help with this ,bear in mind im a newbie!
| seems a shame to sling it!
|
|
| --
| t3zza36
 
Top