Connect with us

Protel Autotrax zoom

Discussion in 'CAD' started by Steve, Aug 28, 2003.

  1. Steve

    Steve Guest

    Protel Autotrax uses PageUp and PageDown keys to zoom
    into and out of the PCB image. The preset steps are:
    1x 3x 5x 10x 20x 50x 100x

    When designing SMD layouts, the fact the 2x is missing
    is quite painful - also 50x and 100x aren't much use.

    We have a patch that gives a better set of zoom values:
    http://www.airborn.com.au/layout/autxzoom.zip

    If you use protel Autotrax, the patch may be useful.
    The patch is still Beta - I would appreciate any
    feedback (email address is with the instructions)
    about how well it works for you, and if there are
    any problems.

    Steve
    www.airborn.com.au
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-