Connect with us

Protel & Autotrax for DOS

Discussion in 'CAD' started by weareborg, Sep 10, 2004.

Scroll to continue with content
  1. weareborg

    weareborg Guest

    Anybody know where I can get a copy of Protel Schematic & Autotrax for
    DOS. I only managed to download a demo copy of the latest version, but
    I could really do with the DOS version to run on my old laptop.
    Cheers

    Andy
     
  2. Alan

    Alan Guest


    You can get Autotrax here:
    http://www.protel.com.au/downloads/

    It's freeware now. I don't think Protel have relased Schmatic as
    freeware (wish they would) or if it is available somewhere.

    Alan

    ++++++++++++++++++++++++++++++++++++++++++
    Jenal Communications
    Manufacturers and Suppliers of HF Selcall
    P O Box 1108, Morley, WA, 6943
    Tel: +61 8 9370 5533 Fax +61 8 9467 6146
    Web Site: http://www.jenal.com
    e-mail: http://www.jenal.com/?p=1
    ++++++++++++++++++++++++++++++++++++++++++
     
  3. Andrew Chin

    Andrew Chin Guest

    Protel Autotrax can be freely downloaded from Altium's website

    As for Protel Schematic, searching has yielded me this abandonware
    site http://usuarios.lycos.es/scratchupload/

    However to download anything it appears you'll need to install a P2P
    sharing program called eMule or eDonkey2000. Being on a restricted
    computer precludes me from installing eMule and trying to download
    Protel Schematic, but if you have any success let us know!
     
  4. The autotrax query has been answered elsewhere. If you confirm your email
    address is valid you might find that some anonymous address sends the full
    protel schematic to you tomorrow :)
     
  5. PS. It's sh*t. Orcad SDT is much better.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-