Protel 2004 library

Can anyone tell me if I can globally edit a project schematic library
to add parameters to all components in that schematic? Specifically, I
would like to add a parameter like "Vendor". etc. to all components in
that schematic........

Also, I seem to have inadvertently created several component libraries
in my schematic. Can I consolodate them into one library? When I
compile the schematic I have all components, but I was wondering if I
can combine those libraries in the project to one library.

Thanks for any help.

Ivan

 

I think that it is not possible to add a Parameter globally to all
component of a Schematic library, maybe I'm wrong.

About integrated library:
1. Copy schematic library (.schLib ) si PCB library (.pcbLib ) to a
separate folder
2. Create a source Library Package (project): File >>New >>Integrated
Library . You'll find a new Integrated_Library1.LibPkg in Projects
panel.
3. Add yours libraries (.SchLib and .pcbLib from 1) to this
"project": Project >>Add Existing to Project...
4. Compile: Project>> Compile integrated Library.

Take a look to: "Creating an integrated library" on:

http://www.altium.com/learningguides/TU0111_BuildingAnIntegratedLibrary.pdf