Connect with us

project on traffic light using ATmega32

Discussion in 'Microcontrollers, Programming and IoT' started by hanukaran, Mar 24, 2011.

Scroll to continue with content
  1. hanukaran

    hanukaran

    1
    0
    Mar 24, 2011
    now i wan sen data to be shown in pc.I use visual basic for that. im using Atmega 32 to programme the traffic light..i have the programme ready and its function well..now the problem how to write the coding to send the data to rs232..if let say the red_1 blink its mean '1'...how to send it via rs 232 and max 232 to my visual basic software...can anyone help me...i have attached my coding and my schematic of circuit and the interface..anybody please help me
     

    Attached Files:

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-