Connect with us

project not working

Discussion in 'Troubleshooting and Repair' started by pete g, Dec 3, 2021.

Scroll to continue with content
  1. pete g

    pete g

    94
    2
    Sep 14, 2010
    i'am baaack, o.k. i bought the sub for the fyq3641bh indicator. i made the pcb and built the device. its an esr and cap meter. its seems to work, however none of the segments of the indicator light up?i loaded the hex code with a pckit2. need some help with this thing. thanks.details here:
    https://cxem.net/izmer/izmer192.php
     
  2. 73's de Edd

    73's de Edd

    3,294
    1,393
    Aug 21, 2015
    WHY for PIC data does not show its pins 19 and 20 hooked up ?
     
  3. pete g

    pete g

    94
    2
    Sep 14, 2010
    should they be hooked up? i don't know.
     
  4. pete g

    pete g

    94
    2
    Sep 14, 2010
    yes, i think thet are hooked up. bplus and bminus.
     
  5. 73's de Edd

    73's de Edd

    3,294
    1,393
    Aug 21, 2015
  6. pete g

    pete g

    94
    2
    Sep 14, 2010
    the schematic shows they are hooked up. i checked the pcb. the device shows some functionality.
     
  7. pete g

    pete g

    94
    2
    Sep 14, 2010
    73's de Edd where are you?
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-