Connect with us

Project Help

Discussion in 'General Electronics Discussion' started by Cop1015, Jan 25, 2013.

Scroll to continue with content
  1. Cop1015

    Cop1015

    1
    0
    Jan 25, 2013
    Ok guys I need some help. I am knowlegable in the construction of project but a noob in the electronics. Simply stated I need a wireless transmitter and reciever. I need a motor/servo to activate for approximately 1/4 turn on command and then reverse 1/4 turn on command. As far as load it will be rotating a shaft approximately 1/4" thick and 4foot long. It will have a low resistance load on the shaft, a little more than the weight of shaft. I need the size of all equipment to be kept small, 1-3inches.

    My question is what would be my best option for :
    Reciever/transmitter
    Motor/servo
    Battery

    Thanks
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-