Connect with us


Discussion in 'LEDs and Optoelectronics' started by capturefilms, Nov 19, 2019.

Thread Status:
Not open for further replies.
Scroll to continue with content
  1. capturefilms


    Nov 19, 2019

    I am looking for someone to build a countdown timer. It is to be used as a prop in a film.

    I don't need the housing, just the electronic components, I have no experience with this kind of thing, so I am looking to commission someone to make it.

    I need three components, that are programmable , hours (3 digits), mins (2 digits), seconds (2 digits), (see attached still). I do not need the wording of Hours, mins, Secs to be made, these will be part of the housing.

    I have seen single, double and treble digit LED units (see attached still) and was hoping they could be made from something like this.

    It will be placed in a custom housing, approximately 2.5 inches x 6 inches. any wires/components/power supplies can be easily hidden.

    If anyone would like the challenge of building it or can point in me in the direction of someone than can that would be very much appropriated.

    Many thanks in advance

    Attached Files:

  2. Bluejets


    Oct 5, 2014
    You forgot the most important much are you willing to pay?
    davenn likes this.
  3. davenn

    davenn Moderator

    Sep 5, 2009
    not really suitable for this forum

    maybe a hackerspace electronics forum
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
Thread Status:
Not open for further replies.
Electronics Point Logo
Continue to site
Quote of the day