Connect with us

programming PIC16F84

Discussion in 'Electronic Basics' started by [email protected], Sep 7, 2006.

Scroll to continue with content
  1. Guest


    i m new to programming PIC microcontrollers.....recently i built the
    JDM programmer and used IC prog to program the PIC16F84.......but it
    showed "verify failed at address 0000h".......what might be the
    problem.....plz help me....
  2. Did your reset the fuses?
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day