Connect with us

programming PIC 16F877A with the "world most easy pic programmer"?

Discussion in 'General Electronics' started by marco, Jul 29, 2003.

  1. marco

    marco Guest

    I use this programmer for 16F84A, do you think it should work also with
    16F877a (connecting RB3 to GND)?
    thanks
    marco

    if you cant read the "schema" (dont know in english) try to copy and paste
    in notepad

    Thanks

    Marco


    5V power
    | supply (or 4.5V battery.)
    |
    -
    R| |100 ohm (down to 56 ohm).
    | |0.5W
    -
    |
    14|
    -------
    | VDD |PIC16C84
    | |
    | |
    | MCLR|------- TxD (2)
    | |4
    | | +--- DTR (20)
    | |13 |
    | RB7 |---+--- CTS (5)
    | |
    | RB6 |------- RTS (4)
    | |12
    | | Connect directly to
    | GND | serial interface.
    -------
    5|
    +---------- GND (7)
    |
    | power
    0V supply
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-