Connect with us

Programming languages and MC selection.

Discussion in 'Microcontrollers, Programming and IoT' started by HellasTechn, Oct 25, 2018.

  1. HellasTechn

    HellasTechn

    1,360
    190
    Apr 14, 2013
    Last edited: Nov 17, 2018
  2. Bluejets

    Bluejets

    2,976
    578
    Oct 5, 2014
    If you go to their web site and click on an example like the $5.00 rhs, it will open another window with options for delivery.
    China post seems the cheapest ( to Aus at least) but usually takes longer also.
     
    HellasTechn likes this.
  3. HellasTechn

    HellasTechn

    1,360
    190
    Apr 14, 2013
    At this point i think i have made up my mind on which cource of action i want to take.
    Arduinos are excellent for beginners like me and ofcorce for advanced users and since i want to build my own boards i will just use the atmega 328-p-pu (i found it on ebay with the arduino uno bootloader).

    My project involves tho microcontrollers. 1st one executing the main code and the 2nd transmitting serial data via software UART to the 1st.
    As 1st (main) MC i can use the atmega 328-p-pu but as 2nd MC i need one (dip-8 package) that is capable of software UART.

    Im having trouble finding a dip 8 chip that is software uart capable. I know that the atmel attiny45/85 are dip8 and capable of accepting the arduino bootloader but as stated in the bottom of this page :
    http://www.hobbytronics.co.uk/arduino-attiny
    the bootloader on theese chips does not support software serial.

    Any ideas or comments welcomed ! THANK YOU.
     
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.