Maker Pro
Maker Pro

Programmable LCD module - Credit Card Sized

M

Mark Essien

Jan 1, 1970
0
Hello All,

I want to design a piece of electronic equipment that is the thickness of
maximum 3 credit cards laid on top of one another. This piece needs to have
an LCD screen as well as a programmable unit that allows me to draw on the
LCD screen.

I will be attaching a unit to it, so there has to be some type of input
mechanism.

Where do I find such a module, and with what keywords should I be searching
for it?

Regards,
Mark.
 
D

Don McKenzie

Jan 1, 1970
0
Mark said:
Hello All,

I want to design a piece of electronic equipment that is the thickness of
maximum 3 credit cards laid on top of one another. This piece needs to have
an LCD screen as well as a programmable unit that allows me to draw on the
LCD screen.

I will be attaching a unit to it, so there has to be some type of input
mechanism.

Where do I find such a module, and with what keywords should I be searching
for it?

Regards,
Mark.

I think the 3 x credit card size may be a tall order, but here is a
device that may be of interest.
http://www.dontronics-shop.com/product.php?productid=16460

It is about to be released in the next week.
Any questions can be asked on the message board at:
http://www.websitetoolbox.com/tool/mb/dontronics
under the 4DSystems forum

Don...




--
Don McKenzie
E-Mail Contact Page: http://www.dontronics.com/e-mail.html

Micro,TTL,USB to 1.5" color LCD http://www.dontronics.com/micro-lcd.html
USB,RS232 or TTL to VGA Monitor http://www.dontronics.com/micro-vga.html
World's smallest USB 2 TTL Conv http://www.dontronics.com/micro-usb.html
 
Top