Connect with us

Problems with PCB layout

Discussion in 'PCB Layout, Design and Manufacture' started by bancroft, Jul 19, 2021.

Scroll to continue with content
  1. bancroft

    bancroft

    65
    2
    Apr 23, 2021
    PCB layout, in addition to the components on the schematic, can also add their own components? For example, digital ground, analog ground, single-point ground 0 ohms resistor, and magnetic beads, test points, etc. These are on the schematic diagram, or that the PCB layout engineer additionally added to? How to add?
     
  2. Minder

    Minder

    3,102
    664
    Apr 24, 2015
    What is the actual question here??
     
    davenn and PETERDECO like this.
  3. bancroft

    bancroft

    65
    2
    Apr 23, 2021
    In addition to the components on the schematic, can I also add my own components?
    If can do it, how to add?
     
  4. Minder

    Minder

    3,102
    664
    Apr 24, 2015
    Depends on the S/W being used, I use and am familiar with the free Kicad and you can add components as you wish.
    For the physical layout, you would also need to provide a footprint.
     
  5. bancroft

    bancroft

    65
    2
    Apr 23, 2021
    I've been thinking about changing the software I use recently, and after hearing you say that, I think Kicad is a good choice.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-