Maker Pro
Maker Pro

Problems Treadmill Circuitboard

Franz

Sep 10, 2016
1
Joined
Sep 10, 2016
Messages
1
Hello, i habe some Problems with my Prosport Treadmill. Its running for about a minute and stops with an error E02 . Error E02 shall mean Problems with the drive. I checked the drive with a friends DC Powersupply , its working fine. Problem must be in the circuit board.I alreadY changed the big capacitor with 470uF cause the old one was damaged. Can anyone hell me fix the Problem?
Kindly regards Franz
 

Attachments

  • 14735200170821829704601.jpg
    14735200170821829704601.jpg
    336.5 KB · Views: 72
  • 1473520037379161459938.jpg
    1473520037379161459938.jpg
    366.5 KB · Views: 54
  • 1473520062820639971571.jpg
    1473520062820639971571.jpg
    363.6 KB · Views: 54
Top