Connect with us

Problem with my projection LCD

Discussion in 'Electronic Repair' started by [email protected], Jun 8, 2007.

Scroll to continue with content
  1. Guest

    I have a 55 inch sony projection LCD. After being on for a minute or
    the TV goes into standby mode (lamp and sound goes out, power light
    flashes) for about 20 seconds, than the picture and sound come back
    on. After a minute the cycle starts again.

    I have been told mostly likely the lamp is heating up and getting
    ready to go bad.

    Does anyone have any advice for me.

  2. Meat Plow

    Meat Plow Guest

    Have someone look at it that is Sony trained.

    #1 Offishul Ruiner of Usenet, March 2007
    #1 Usenet Asshole, March 2007
    #1 Bartlo Pset, March 13-24 2007
    #10 Most hated Usenetizen of all time
    #8 AUK Hate Machine Cog
    Pierre Salinger Memorial Hook, Line & Sinker, June 2004
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day