Problem with decade counter simulation in multisim9

[hybrid_snyper]

Hi,

I am having a little trouble with a test im running on a decade
counter. The circuit is supposed to move a single high bit through the
counter then reset and start again upon a new clocking signal. However
I am having trouble with the results i get in the logic analyzer, the
waveforms are diffrent everytime and not even close to the desired
effect.

I have attached a link to my ms9 file so if anyone wants to take a look
at the settings for the word and my circuit. I think the circuit is
sound but i may be wrong.

http://www.studentperks.co.uk/counter.ms9

Thanks in advance

HS

 

[Richard Seriani, Sr.]

Hi,

I am having a little trouble with a test im running on a decade
counter. The circuit is supposed to move a single high bit through the
counter then reset and start again upon a new clocking signal. However
I am having trouble with the results i get in the logic analyzer, the
waveforms are diffrent everytime and not even close to the desired
effect.

I have attached a link to my ms9 file so if anyone wants to take a look
at the settings for the word and my circuit. I think the circuit is
sound but i may be wrong.

http://www.studentperks.co.uk/counter.ms9

Thanks in advance

HS

Can you post the circuit another way? Not all of us are using ms9.

Richard