Connect with us

Problem displaying on OLED

Discussion in 'Microcontrollers, Programming and IoT' started by d1ng0, Aug 5, 2021.

Scroll to continue with content
  1. d1ng0

    d1ng0

    8
    0
    Jul 3, 2021
    Hi, I'm on a project where I would like to measure a battery voltage. For that, I have to use a Digital Current and Power Monitor, called INA260 and using the PIC18F26K80. I can already read the values of the INA260 the only problem is that when I want to show these values on an OLED it doesn't show and it doesn't seem to start. I already had a project that worked perfectly with the OLED. I just imported the OLED library for this INA260 project and I am not able to show anything. Is it some communication conflict because the two are by I2C?

    Project Code: https://github.com/D1ng00/INA260_OLED
     
  2. shumifan50

    shumifan50

    578
    57
    Jan 16, 2014

    Check your i2c addressing.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-