Connect with us

pressure pad timing

Discussion in 'Electronic Basics' started by jason, Apr 15, 2006.

Scroll to continue with content
  1. jason

    jason Guest

    I was wondering if it would be possible to connect a simple pressure
    mat to a time of some sort so that I could time pressure pad contact
    time. If it is possible how would one go about it?
    Thanks guys, Jason.
     
  2. Chris

    Chris Guest

    Hi, Jason. There are many elapsed time clocks which are
    switch-activated. You can easily hook up the pad wires to one of
    these.

    There are many elapsed time totalizers available commercially. For
    testing, I've used the ATC 5707, which has an internal 3V lithium
    10-year battery, dry contact activation, 0.1 second resolution, and a
    separate contact for resetting the totalizer.

    Is this what you're looking for?

    Chris
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-