Connect with us

Powerline concentrator

Reply to Thread

Discussion in 'General Electronics Discussion' started by hichem, Feb 15, 2012.

Scroll to continue with content
  1. Feb 15, 2012 #1
    hichem

    hichem

    4
    0
    Feb 15, 2012
  2. Feb 16, 2012 #2
    hichem

    hichem

    4
    0
    Feb 15, 2012
    hello, there is anyone here!!!!!
     
  3. Feb 16, 2012 #3
    Resqueline

    Resqueline

    2,848
    2
    Jul 31, 2009
    Yes there is, but no-one's probably ever heard of or worked with Powerline concentrators before, and I'm just as wise after reading the pdf...
     
  4. Feb 16, 2012 #4
    (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,489
    2,830
    Jan 21, 2010
    I don't know, and almost certainly not.
     
  5. Feb 16, 2012 #5
    hichem

    hichem

    4
    0
    Feb 15, 2012
    ok thank you
     
  6. Feb 16, 2012 #6
    (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,489
    2,830
    Jan 21, 2010
    Actually, there may be a simple reason why 2 processors are used. It is possibly that TI had some modules already developed and glued them together.

    I'm not sure why to want to use 2 of the same processor (are you designing a clone?) or perhaps you want to consolidate into one processor?

    The processors are totally different, so you can't just use a different processor. Having said that, if you're prepared to rewrite the software, redesign the hardware, and do *lots* of testing then you could try...
     
  7. Feb 16, 2012 #7
    hichem

    hichem

    4
    0
    Feb 15, 2012
    I didn't mean that i like to use 2 processors AM1808, but i like to use only one processor in my design: AM1808, and all tasks treated by TMS320 will be treated by AM1808.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Powerline Communications

  2. can I start dc motor with (ultra)concentrator and manual switch

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-