Connect with us

Powering a pic

Discussion in 'Electronic Components' started by CA Zuke, Oct 15, 2004.

Scroll to continue with content
  1. CA Zuke

    CA Zuke Guest

    Hi,

    Can someone PLEASE tell me what the current (Amperes) should be for
    powering a pic?

    I use a L7805 voltage regulator but it still seems like I can get a
    whole range of different levels of current depending on the batteries
    use. (also you get different Amps for the L7805. Some are 0.1A and
    others are 1A or even 2A)

    I have 4 1.2V 1800mA batteries but I guess that current is far too
    high. The 9V rechargable I have is 150mAh. How is it possible that the
    9V has so little curent compared to he 1.2V??? I aways thought 9V is
    stronger?

    Anyway.. I really want to power my pic off a battery. So please let me
    know what the current and voltage should be.

    Thanks in advance
    CE AUKE
     
  2. You'll first have to learn something about electricity. Voltage, current,
    resistance and Ohms law. Otherwise you'll never be able to understand what
    you need, let alone find out how to make it. I can't write a course on it
    right now and any usefull answer on your question prerequites some basic
    knowledge.

    petrus bitbyter
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-