Connect with us

Power Supply

Discussion in 'Power Electronics' started by Twodio, Aug 17, 2013.

Scroll to continue with content
  1. Twodio

    Twodio

    35
    0
    May 17, 2013
    Hi guys.
    I'm thinking about make my own galvanizator, something basic, but i've never worked with AC in my DIYs and i'm a little scared when i think that i'll plug it on AC, means that i can't fail out in nothing.
    So i decided ask yours help in that.

    For this galvanizator i have a older transformer with 12.5v and 1200mA, Rectifier diodes if i need to convert, resistors 1/4w, some capacitors, leds of different colors, and transistors.

    The transformer and a little piece of metal for transistor if need to dissipate some heat.

    [​IMG]
     

    Attached Files:

    Last edited by a moderator: Aug 17, 2013
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-