Connect with us

Power over Coax

Discussion in 'Security Alarms' started by Dave, Oct 20, 2003.

Scroll to continue with content
  1. Dave

    Dave Guest

    Anyone out there using power over coax for their CCTV cameras? If so,
    what products do you use? I would like to find a 19" rack type model
    that supports as many units as possible. Ultimately I would need to
    power roughly 25-30 from the same location so the smaller the unit
    with the most ports is best. If anyone has any links or contacts I
    can check out that would be great. I've searched the web for a while
    without much luck.

    tia,

    Dave
     
  2. Bob La Londe

    Bob La Londe Guest

    ATV Research has some power over cable units. I don't recall seeign any
    rack mountable setups for multiple cameras.


    --
    Bob La Londe
    Yuma, Az
    http://www.YumaBassMan.com
    Promote Your Fishing, Boating, or Guide Site for Free
    Simply add it to our index page.
    No reciprocal link required. (Requested, but not required)
     
  3. pbealing

    pbealing Guest

    We used to install and maintain Panasonic equipment. They had a 1U 19"
    rack mounted quad power supply for power over coax.
    I don't know what they have now.

    Paul
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-