Connect with us

power on delay circuit

Discussion in 'Electronic Design' started by chitta, Mar 6, 2008.

Scroll to continue with content
  1. chitta

    chitta Guest

    My name is chittaranjan
    Pls help me realise the following waveform on power ON
    1. HIGH for 2 sec after power ON
    2. LOW for 2sec
    3.HIGH permanently
  2. MooseFET

    MooseFET Guest

    With the specs you gave I would suggest:

    Clock motor + brush contacts + 100KV supply.
  3. Randy

    Randy Guest

    You need to give more info...the waveform is the POWER supply
    waveform, or just a signal waveform that is generated on power up?

    In either event, a monostable multivibrator ckt in non-retrigger mode,
    with a couple of flip-flops will do the trick. If this mediates the
    downstream power supply, then a power transistor as well.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day