Connect with us

Power distribution board

Discussion in 'General Electronics Discussion' started by densant, Feb 27, 2013.

Scroll to continue with content
  1. densant

    densant

    5
    0
    Nov 2, 2012
    Hello,
    I have a bunch 18/4 wire which are powering LED strips, and i was wondering if there are any power distribution board where i can bring a line from the 12V 320Watt power supply and connect the wires to the board.
    this is only to make a clean install and easier to install and service in the future.

    [​IMG]
    [​IMG]

    thats what it looks like now.
     
  2. shrtrnd

    shrtrnd

    3,821
    519
    Jan 15, 2010
    I'd use a standard terminal barrier strip. It's not going to cut down the number of wires,
    obviously; but it'll organize that rat's nest a little better.
    (You'll need a bulkhead close by to mount the barrier strip).
     
  3. densant

    densant

    5
    0
    Nov 2, 2012
  4. shrtrnd

    shrtrnd

    3,821
    519
    Jan 15, 2010
    Keep checking for what you need. MCM stocks best-sellers. Just because they don't
    carry something, doesn't mean what you need isn't out there from somebody else.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-