Connect with us

power co bonding question

Discussion in 'Electronic Design' started by Active8, Oct 21, 2003.

  1. Active8

    Active8 Guest

    hi:

    in a MGN (multigrounded neutral) system, are the primary and secondary
    neutrals usually bonded? Y system, of course.

    i double checked MGN:

    ***********
    Multigrounded Neutral: A power system neutral conductor which is
    connected to purposefully installed (made) electrodes or existing
    electrodes at least four times per mile (1.6 km) in addition to the
    grounding connections at individual services and each transformer
    location.
    **********

    which is what i thought. i may have seen secondary neutral bonded to
    primary, but i'm not sure. in this town the two are bonded and the
    primary neutral is actually the strand of a triplex secondary with the
    service drops bonded to it.

    uh, kinda cheesy, IMNSHO.

    TIA,
    mike
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-