Connect with us

Potting for High temperatures

Discussion in 'Electronic Design' started by [email protected], Nov 15, 2005.

Scroll to continue with content
  1. Guest

    I hope someone can shot some light into the problem I am encountering:

    I am looking for a potting epoxy that could be used in electronics
    working at high temperatures (+150ºC). Another important feature
    would be for the resin to be as clear and transparent as possible. I
    basically want to see the components under the potting.

    Anymore details needed don't hesitate to ask!

    TIA
     
  2. sylgard 170

    gray potting compound. The gray has better thermal properties.

    There is a clear, www.dowcorning.com


    I hope someone can shot some light into the problem I am encountering:

    I am looking for a potting epoxy that could be used in electronics
    working at high temperatures (+150ºC). Another important feature
    would be for the resin to be as clear and transparent as possible. I
    basically want to see the components under the potting.

    Anymore details needed don't hesitate to ask!

    TIA
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-