Connect with us

potentiometer Colvern old model id

Discussion in 'Datasheets, Manuals and Component Identification' started by Elfix, May 30, 2015.

Scroll to continue with content
  1. Elfix


    May 30, 2015
    I have an autopilot on a boat from 1980 Theres a problem with a potmeter it`s marked
    22061 / 2473
    This id does not tie in with the present Colvern markings, anyone know what the numbers represent?
  2. Martaine2005


    May 12, 2015
    Hi Elfix
    You are right, those numbers bring zero results.
    However, it was an English company and I have phoned the owners that took over.
    They do have stock and possibly an equivalent if not.
    He said the 585R is probably the ohms value and J is the tolerance.

    But he would need to see pictures Top, side and bottom.
    Email them too:
    [email protected]

    Hope that helps.
    Last edited: Jun 12, 2015
    Harald Kapp likes this.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day