Connect with us

post or request any electronic or microcontroller book

Discussion in 'Electronic Design' started by [email protected], Apr 6, 2007.

Scroll to continue with content
  1. Guest

    you can request from me for any book you want but about electronics
    and microcontroller and you will found it at my site .
    the strange that i found every monday its make one of its checkout
    book afree book for monday only then make it checkout books so i hope
    and advice all microcontroller programmer to get the weekly free book
    or prize
    thanks to all group
  2. Guest

    its very well , thank you sir
    America: Land of the Free, Because of the Brave
  3. JeffM

    JeffM Guest

    was: post or request any electronic or microcontroller book

    Your site should stand on its own without gimmicks.

    It won't do that until you make it A LOT LESS CRAPPY.

    1) Stop using Microsoft Word to write HTML pages
    and get yourself a REAL HTML Editor*-*+will.*.reformat.your.code

    2) Use *Validation Tools* to clean up the code you generate
    --ESPECIALLY the pseudo-HTML you have done with M$ Word.*-from-Microsoft-Word-*&strip=1

    3) Spend some time here
    and learn how NOT to make a Web page.

    Start by getting rid of the ANNOYING flashy crap.
  4. JeffM wrote some unnecessarily mean stuff:
    I don't see anything blinking, so I guess it looks like he got rid of "the
    annoying flashy crap" as you so tactfully put it. Though it could still use
    some layout work, I think the site is decent enough, it's certainly better
    than allot of them out there. Don't you think that you could at least give
    the guy a break since he's trying to give back to the world? Constructive
    criticism is one thing, but man you treated him like some nigerian spammer.
    Where is the spam?....some Google ads?...a few books for what looks like
    very low prices?.....
  5. It's not my site.
    I don't see anything blinking. :-?
    What is blinking?
  6. What is blinking?

    Most headers:
    Books Projects Datasheets Compilers Softwares Learn

    The whole left margin text

    Most anything in blue font is flashing (except the ad text). Still.
  7. OK, I installed FireFox and I now see it, that does suck. I looked at the
    page source and I don't see any reason for it to blink like that though, but
    I'm certainly no HTML expert. The OP seems to have used FrontPage (not
    Word) to create it. It's not like it's personally his fault that M$ can't
    generate proper HTML.
  8. Donald

    Donald Guest

    I just tried your site.

    Please stop the blinky stuff.

    You have proven that you can do it, now stop.

  9. Donald

    Donald Guest

    Sorry Anthony

  10. Don't overlook the possibility (however remote it might seem) that it
    might be an intentional thing on the part of M$

    Best regards,
    Spehro Pefhany
  11. Donald

    Donald Guest

    No matter where it comes from, the page sucks.

    The OP asked for feedback, and it sucks.

    A few flashy things are OK, to bring attention to something important,
    but the _whole_page_ !!

    So the OP should fix it, or leave it and I for one will not return.

  12. I guess I'm pretty cynical, but that was the first thing that crossed my
    mind. What a coincidence, it just happens to flash annoyingly in
  13. You are missing the point. The page author didn't intend it to flash like
    that. It doesn't flash in IE. Since the author used FrontPage to create
    the page, it stands to reason that he tested it with IE and didn't see any
    flashing. Did you look at the projects? It's pretty decent work, I'm sure
    he'll fix the blinking when he figures out how. ;-) It appears to be a
    sick joke by M$.
  14. JeffM

    JeffM Guest

    Like a 9 year old produced it.
    *BY* M$ Word or *FOR* M$ Word--it's all the same:
    Bloated, non-compliant code.
    BEFORE putting up a page on the Web,
    make the effort to assure that it is standards-compliant:
    Spehro Pefhany wrote:
    :Don't overlook the possibility (however remote it might seem)
    :that it might be an intentional thing on the part of M$

    One assumes that the OP wasn't forced at gunpoint to use those tools.
    Better tools are READILY available for FREE.

    If YOU use NON-standards-compliant tools, it is YOUR responsibility
    to convert the crap it produces into compliant code.
    Don't waste MY bandwidth
    downloading unnecessary junk that M$ embeddeds (read: ADDS)
    to make their pseudo-HTML **M$ Word-compatible**.
    (Another link from my 1st post.):*-from-Microsoft-Word-*&strip=1
  15. Jim Thompson

    Jim Thompson Guest

    If not confined by "free", what HTML editor is "best"?

    ...Jim Thompson
  16. Yes it looks bad with the blinky text, but in all fairness, the author
    didn't make it look that way on purpose. Once you get past that, the
    content is good. In fact, it is very good. I'd hate to see it disappear
    because I like his collection of circuitry. I intend to pilfer from it.
    Translation: Here is some freely available software that might assist you
    in improving your site's compliance.
    Translation: Please try to use standards compliant software because some
    companys attempt to redefine standards which results in pages that some
    browsers have trouble viewing.

    My personal comentary: Blah blah blah, do you have a site helping newbies
    out with electronics, or maybe HTML? If you made half the effort to explain
    this in a non-combative way to the author as you did you humiliate him, we
    all might feel better about it. I hope you don't spend allot of time
    writing diatribes to every site that crams a bunch of unnecessary junk in
    the HTML they send you, or you'll be a very busy individual. ;-)
  17. JeffM

    JeffM Guest

    This is Usenet. Get used to it.
    I still say everything was accurate and warranted.
    The issues are:
    1) The irritating flashy crap.
    2) Bloated code.
    1) First post to the thread is an advertisement.
    Exacerbated by the fact that it was HIS first post to the group.
    (Not *necessarily* spam--if it's all FREE.)

    2) (First link in my post):

    Multi-posted == Spew == SPAM

    The OP needs to figure out that THIS ISN'T GOOGLE GROUPS
    and learn how to post to Usenet properly:
  18. Neimadre

    Neimadre Guest

    Just what is the proper way to post to usenet? You're a noob aint ya?

    Usenet lits score:
    #20 Usenet asshole
    #6 Lits Slut
    #11 Most posting trolls/hunters/flonkers 2007
  19. JeffM

    JeffM Guest

    "Best" is always subjective.

    Many pros (who are willing to dedicate the bucks to this app)
    use Dreamweaver.

    Many folks (some of whom CAN easily afford Dreamweaver)
    choose Mozilla Composer / Nvu / KompoZer
    --whether it's to support Open Source
    or simply because they prefer the feel.

    There are also folks who prefer HTML-Kit
    because of the way it works with HTML Tidy.

    Pick your poison:
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day