Connect with us

PM2525/515 Calibration

Discussion in 'Electronic Equipment' started by Fabri, Apr 24, 2005.

Scroll to continue with content
  1. Fabri

    Fabri Guest

    Hello,

    I've this multimeter PM2525/515. After the voltage value it write always
    "NC" for example 200.03NCmV. I thinks that NC is for Not Calibrate..

    Someone know what i have to do?

    Thanks very much

    Fabrizio
     
  2. This means Not Calibrated !!!; mostly due to a dead 3V battery inside.
    I think in this cas the PM25252 needs to be 'hot' and 'cold' calibrated
    (the PM2525 has an internal temperature compensation for all measurements)

    koen verstappen
     
  3. Fabri

    Fabri Guest

    Hello thanks!

    I'll check the battery.

    How can I calibrated the PM2525? Do you know the procedure?

    Thanks

    Fabrizio
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-