Connect with us

Please help me identify this resistor "R200". Pic included

Discussion in 'Troubleshooting and Repair' started by micronut, Oct 3, 2010.

Scroll to continue with content
  1. micronut


    Oct 3, 2010
    I am trying to repair a Samsung DLP big screen tv. I have repaired the power supply, and now the tv will turn on and operate normally, except that the picture is very green. After closer examination of the led drive board, I have found two thin, surface mount resistors that were broken in half and appear to be burned along the break.
    Possibly due to the original power supply issue?

    Anyhow, I have moderate electronics repair experience, but not much experience with modern electronics. Any help identifying the values of these would be greatly appreciated!:)

    The only marking is "R200" printed on the face of both.

    Thanks in advance for any help!
  2. LTX71CM


    May 23, 2010
    It looks to be a 0.20 OHM 2512 SMD part.
  3. micronut


    Oct 3, 2010
    Thanks for the reply.:)

    I Googled "R200 resistor" and that's what came up, but I just wanted some verification.
    Thanks again!
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day